ct micro rev 1 proprietary & confidential page 1 apr, 2014 PTP83016BT24 smd type phototransistor with daylight filter package outline schematic features ? small double-end package ? high photo sensitivity ? high reliability ? spectral range of sensitivity: 760-1100nm ? fast response time ? rohs compliance applications ? infrared sensor ? infrared touch panel solutions description the PTP83016BT24 is silicon npn phototransistor housed in a miniature smd package. the device comes with a superior filtering for visible light b y utilizing special black molding compound. collector emitter
ct micro rev 1 proprietary & confidential page 2 apr, 2014 PTP83016BT24 smd type phototransistor with daylight filter absolute maximum rating at 25 0 c symbol parameters ratings units notes i c collector current 20 ma b vceo collector-emitter voltage 35 v 1 b veco emitter-collector voltage 5 v 2 t opr operating temperature -40 ~ +85 0 c t stg storage temperature -40 ~ +100 0 c t sol soldering temperature 260 0 c 3 p to total power dissipation 150 mw optical characteristics symbol parameters test conditions min typ max units notes spectral bandwidth - 760 - 1100 nm p peak sensitivity - - 880 - nm 1/2 view angle v ce =5v - 22.5 - deg electrical characteristics symbol parameters test conditions min typ max units notes i ceo dark current ee=0mw /cm 2 v ce =20v - - 100 na v ce(sat) collector-emitter saturation voltage ee=1mw /cm 2 i c =1.4ma - - 0.4 v i c collector light current ee=1mw /cm 2 p =940nm, v ce =5v 1.4 2.8 4.4 ma 4 c t terminal capacitance ee=0mw /cm 2 f=1mhz ,v ce =5v - 3.80 - pf
ct micro rev 1 proprietary & confidential page 3 apr, 2014 PTP83016BT24 smd type phototransistor with daylight filter switching characteristics symbol parameters test conditions min typ max units notes t r rise time v ce = 5v, r l = 100 i c =1.0ma - 6 - s 5 t f fall time - 7 - t on turn on delay time - 11 - t off turn off delay time - 7.9 - notes: 1 : test conditions : i c =100 a, ee=0mw/cm 2 . 2 : test conditions : i e =100 a, ee=0mw/cm 2 . 3 : soldering time Q 5 seconds. 4 : i c bin rank : (tolerance of collector light current 10%) bin code ta tb min 1.4 2.4 max 2.4 4.4 5 : test circuit:
ct micro rev 1 proprietary & confidential page 4 apr, 2014 PTP83016BT24 smd type phototransistor with daylight filter typical characteristic curves
ct micro rev 1 proprietary & confidential page 5 apr, 2014 PTP83016BT24 smd type phototransistor with daylight filter typical characteristic curves
ct micro rev 1 proprietary & confidential page 6 apr, 2014 PTP83016BT24 smd type phototransistor with daylight filter package dimension all dimensions are in mm, unless otherwise stated recommended soldering mask all dimensions are in mm, unless otherwise stated ordering information p art number description quantity PTP83016BT24 tape & reel 2000 pcs
ct micro rev 1 proprietary & confidential page 7 apr, 2014 PTP83016BT24 smd type phototransistor with daylight filter reel dimension all dimensions are in mm, unless otherwise stated tape dimension all dimensions are in mm, unless otherwise stated
ct micro rev 1 proprietary & confidential page 8 apr, 2014 PTP83016BT24 smd type phototransistor with daylight filter reflow profile profile feature pb-free assembly profile temperature min. (tsmin) 150c temperature max. (tsmax) 200c time (ts) from (tsmin to tsmax) 60-120 seconds ramp-up rate (t l to t p ) 3c/second max. liquidous temperature (t l ) 217c time (t l ) maintained above (t l ) 60 ? 150 seconds peak body package temperature 260c +0c / -5c time (t p ) within 5c of 260c 30 seconds ramp-down rate (t p to t l ) 6c/second max time 25c to peak temperature 8 minutes max.
ct micro rev 1 proprietary & confidential page 9 apr, 2014 PTP83016BT24 smd type phototransistor with daylight filter disclaimer ct micro reserves the right to make changes without further notice to any products herein to improve reliability, function or design. ct micro does not assume any liability arising out of the application or use of any produc t or circuit described herein; neither does it convey any license under its patent rights, nor the rights of others. ___________________________________________________ ___________________________________ ct micro are not authorized for use as critical com ponents in life support devices or systems without express written approval of ct micr o international corporation. 1. life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain li fe, or (c) whose failure to perform when properly used in accordance with instruction for use provided in the labelling, can be reasonably expected to result in significant injury to the user. 2. a critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness.
|
